The vibration eliminators type VAFS are approved for working pressures up to 60 bar and can be installed between the compressors and in both the suction and discharge line of air conditioning, heat pump and refrigeration systems. The function of the eliminators is to absorb the vibrations caused by the compressor.
They are constructed of deep pitch corrugated tubing covered wire braid and connectors. The body of the VAFS is made out of stainless steel while the connectors are made of copper.The eliminators are 100% pressure and leak tested.

Installation instructions

The vibration eliminators should be installed as shown above in the mounting drawing.

Due to their special design the vibration eliminators need not to be cooled during the soldering.


Technical specification

Max. admissible operating pressure PS 60 ba
Allowable operating temperature 140 … –50°C